WEBVTT

00:00:00.000 --> 00:00:06.000
Gather the print and scoring tools. The craft knife is optional.

00:00:06.000 --> 00:00:11.000
Print the practice PDF on A4.

00:00:11.000 --> 00:00:17.000
Find the two bold lines. The thinner lines are folds.

00:00:17.000 --> 00:00:24.000
Pinch across the solid line. Snip, open flat and cut to each end.

00:00:24.000 --> 00:00:31.000
Cut the second slit. Leave both ends of the strip attached.

00:00:31.000 --> 00:00:37.000
Score the dashed hinges lightly with a straightedge and blunt tool.

00:00:37.000 --> 00:00:43.000
Score the dotted ridge. Bend it towards the printed side.

00:00:43.000 --> 00:00:50.000
Score the dashed spine on either side. Keep the spine attached.

00:00:50.000 --> 00:00:56.000
Start flat at 180°. Hold the floor down and raise the back.

00:00:56.000 --> 00:01:02.000
Guide the ridge towards you. Let the dashed valleys sink in.

00:01:02.000 --> 00:01:07.000
Stop at 90°. The tread is level and its front stands upright.

00:01:07.000 --> 00:01:16.000
On Pont du Gard, cut around the shaded arch, including its base.

00:01:16.000 --> 00:01:22.000
Lift out the loose waste. Keep the white piers on both sides.

00:01:22.000 --> 00:01:24.000
With all the arches cut and hinges scored, start flat.

00:01:24.000 --> 00:01:30.000
Hold the front down. Lift the back slowly and ease the lower arcade forward.

00:01:30.000 --> 00:01:36.000
Keep lifting. Guide the middle row forward from the ledge below it.

00:01:36.000 --> 00:01:43.000
Ease the small upper row towards you as the back comes upright.

00:01:43.000 --> 00:01:48.000
Stop at 90°. Each row of arches stands on the ledge below.
